Quantum 610
www.quantumrehab.com
27
A
C
D
B
B
C
D
A
Figure 25. Multi-Axis Foot Plate (ELR Shown)
V . C O M F O R T A D J U S T M E N T S
SETSCREW LOCATION
To adjust the leg rest length:
1. Remove the adjustment screws from the leg rest exten-
sion.
2. Slide the leg rest up or down to the desired length.
3. Align the adjustment holes in the leg rest extension and
reinstall the adjustment screws.
MULTI-AXIS FOOT PLATE
The multi-axis foot plate assembly can be installed on either
a swing-away footrest or an elevating leg rest. The multi-
axis foot plate has four adjustments: leg rest length (A),
position (B), tilt (C), and angle (D). See figure 25.
To change leg rest length (A):
1. Remove the hardware.
2. Move the leg rest to the desired position.
3. Reinstall the hardware.
To change foot plate position (B):
1. Remove the hardware.
2. Move the foot plate to the desired position.
3. Reinstall the hardware.
To change foot plate tilt (C):
1. Loosen the hardware.
2. Tilt the foot plate to the desired position.
3. Tighten the hardware.
To change foot plate angle (D):
1. Turn the setscrew clockwise to decrease the angle.
2. Turn the setscrew anticlockwise to increase the angle
.
