Quantum PX720, Руководство пользователя

Страница: 156 / 259

Chapter 3 Quantum PX720 Remote Management
Setup
Quantum PX720 User’s Guide 133
The FC470 web interface displays. For more information on the
FC470 Fibre Channel bridge and the web interface, see the Quantum
FC470 User’s Guide Addendum (PN 6513505) included on the
Quantum PX720 documentation CD.
• Click
Refresh
to update all known Fibre Channel bridges. If any
bridges are discovered that are not communicating, it will be
listed as
Not Communicating
.
• Click
Rescan
to re-discover any recently installed Fibre Channel
bridges. Rescan will also remove any non-communicating
bridges.
• Click
Discovery
to issue a discovery command on all SCSI buses
and Fibre Channel ports on the selected bridge.
Network
3
The network information section allows the user to enter network
information so the library can be controlled remotely via an Ethernet
network.
1 To access the
Network
page, from the
Setup
page, click on the
Network
tab at the top of the page.
The
Network
page displays (see figure 80 ).
Note: The library must be offline to issue a bridge discovery
command.