Quantum PX720, Руководство пользователя, Страница: 135 / 259

Chapter 3 Quantum PX720 Remote Management
Operations
Quantum PX720 User’s Guide 112
2 Click
Find
.
A separate window displays the barcode(s) sharing the barcode
string entered in the barcode field and it’s location within the library.
Click the individual barcode label to display the corresponding
cartridge detail page.
Show Contents
3
The show contents section allows the user to show the contents of any
element within a library or partition (slots, ports, drives, gripper, or
address).
To show the contents of a library element:
1 Select the library or partition, element, and enter a position and count
if desired.
2 Click
Show
.
A separate window displays the contents of the elements selected.
Click the individual barcode label to display the corresponding
cartridge detail page.
Select Map
3
The select map section allows the user to view the library in either a
physical or logical view. To toggle between physical and logical map,
click the
Physical/Logical Map
button in the map section.
Physical Map:
A physical map (see figure 66 ) displays a high level
physical representation of the library. Each drawer, load port, or drive
cluster is displayed as a panel located on either the left, rear, or right wall
of the library. Clicking on the panel name opens a zoom view of the panel
Note: To show the contents of a range of elements, enter a start
element (example: 0 for slot 0) in the position field and the
number of elements you wish to show (example: 10 would
show slot 0 through slot 9).
Note: The
Physical/Logical Map
information is displayed at the
bottom of each
Operations
page.