Quantum P4000 Series, Руководство пользователя

Страница: 91 / 168

Chapter 3 Operator Commands
Unloading the Load Port
Quantum P4000 and P7000 Libraries User’s Guide 71
The
Unload Drive
command continues until completed unless you press
the
Abort
button to stop the operation.
Unloading the Load Port
3
The
Unload Imp/Exp
command moves a tape cartridge from the load port
to an available storage bin. This option must be invoked after inserting a
tape into the load port whenever the library auto load feature is disabled
(see Configuring Library Options on page 66).
To unload the load port:
1 On the
Operator
screen, press the
Unload Imp/Exp
button.
The GUI displays a
Command In Progress
dialog box is displayed.
2 If it becomes necessary to stop the Unload command, press the
Abort
button
Note: You can also use the
Move Cartridge
command to unload the
load port. The
Move Cartridge
command is especially useful if
the destination of the move is important. For more information
about the
Move Cartridge
command, see Moving Cartridges on
page 68.”
Note: The inventory process is also stopped if an error is
detected. In this case, the GUI displays an error message.