Quantum LTO-5 HH SAS C, Техническое справочное руководство

Страница: 46 / 118

Chapter 4: Operations
Removing a Tape Cartridge
40 Quantum LTO-5 HH SAS Model C User’s Guide
Removing a Tape Cartridge
To remove a tape cartridge:
1 Ensure that the drive is powered-on.
2 Press the Unload Button. The drive rewinds the tape and partially
ejects the cartridge. The Ready light flashes while the tape rewinds,
then goes out before the cartridge partially ejects.
3 After the cartridge partially ejects, grasp the cartridge and remove
it.
Note: Always remove an ejected cartridge before reinserting.
Whenever you unload a tape cartridge, the drive writes any pertinent
information to the cartridge memory.
Mid-tape Recovery
If reset occurs while a cartridge is loaded, the drive will slowly rewind
the tape and eject the cartridge. If a power cycle occurs while a
cartridge is loaded, the drive will slowly rewind the tape. The drive will
not automatically eject the cartridge.
The Ready light flashes and the SCD displays random segments during
tape movement. Push the Unload Button to eject the cartridge when the
Ready light stops flashing.