Quantum DXi6902, Руководство по установке и настройке

Страница: 32 / 64

30 Installing the DXi6902 System in the Rack
DXi6902 Installation and Configuration Guide
Figure 22 DXi6902 SAS
Cabling (Node to RBODs)
2 Connect each Array module (RBOD) to its corresponding Expansion module (EBOD)
using the provided 2m mini-SAS HD to mini-SAS cables (see Figure 23 ).
a Connect SAS expansion port 1 (Controller A) on RBOD 1 to SAS port 1
(Controller A) on EBOD 1-1.
b Connect SAS expansion port 1 (Controller B) on RBOD 1 to SAS port 1
(Controller B) on EBOD 1-1.
c Connect SAS expansion port 1 (Controller A) on RBOD 2 to SAS port 1
(Controller A) on EBOD 2-1.
d Connect SAS expansion port 1 (Controller B) on RBOD 2 to SAS port 1
(Controller B) on EBOD 2-1.
Port 1 Port 2
ID/
Diag
|O|O|
Port 1 Port 2
ID/
Diag
|O|O|
Port 1 Port 2
ID/
Diag
|O|O|
Port 1 Port 2
ID/
Diag
|O|O|
System Node (Rear)
RBOD 1
RBOD 2
1A 1B
2A 2B
1A 2A
1B 2B
A B
A B