Quantum DXi6902 Скачать руководство пользователя страница 100

Страница: 100 / 242

Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Opening and Closing the Node

Quantum DXi6902 User’s Guide

Figure 36 Removing the
DXi6902 Node from the Rack

Grasp the sides of the Node firmly and pull it forward until the rail

standoffs are at the front of the J-slots.

Lift the Node up and away from the rack and place it on a level

surface.

WARNING:

The DXi6902 Node (including hard drives) weighs

53.0 pounds (24.0 kg). A minimum of two people are

required to lift the chassis.

Press and hold the power button on the front of the Node for three

seconds to fully drain the system of stored power prior to removing

the cover (see

Figure 37

Inner slide rails

Rear rail standoffs

Rear rail J-slots

Slide-release lock button

Lock lever

Содержание DXi6902



















































































































































































































































Результаты поиска

Содержание DXi6902

Отзывы:

Quantum DXi6902, Руководство по обслуживанию на месте, Страница: 100 / 242

Результаты поиска

Содержание DXi6902

Отзывы: