Chapter 9: Configuration
VTL Configuration
Quantum DXi6900 User’s Guide
232
Figure 146:
Media Actions Page
To perform actions on virtual tape cartridges:
1. In the
Partition
drop-down box, select the partition that contains the cartridges to work with.
Note:
Select
UNASSIGNED
to work with cartridges that are not assigned to any partition.
The table displays the following information for all virtual tape cartridges in the partition:
Barcode
The barcode number of the cartridge.
Type
The cartridge type (
LTO
or
SDLT
).
Partition
The partition where the cartridge is located.
WP
The write protect status of the cartridge (
Write Enabled
or
Write Protected
).
