background image

6-68446-01, April 2016

*6-68446-01*

© 2015 Quantum Corporation. All rights reserved. Quantum, the Quantum logo, DLT, DLTtape, the DLTtape logo, SuperLoader, 
Scalar, DXi, StorageCare, StorNext, GoProtect, and Vision are registered trademarks of Quantum Corporation and its affiliates 
in the United States and/or other countries. All other trademarks are the property of their respective owners. Quantum 
specifications are subject to change.

Quantum DXi6802 and 

DXi690x: Rack Mount Rails 

Replacement

Follow the steps in this document to replace the rack mount rails in the DXi6802 

or DXi690x:

1

Shutting Down the System

 on page 2

2

Replacing the rack mount rails:

Replacing the DXi6802 or DXi690x Node Rails

 on page 3:

Replacing the DXi6802 Array or Expansion Module Rails

 on page 8

Replacing the DXi690x Array or Expansion Module Rails

 on page 12

3

Turning On the System

 on page 17

Necessary Tools

Before you begin, gather the necessary tools:

• Small flat head screwdriver
• Large flat head screwdriver
• #2 PHILLIPS screwdriver

Caution:

Use appropriate ESD precautions, including the use of a grounding 

strap, when performing any of these procedures.

Содержание DXi690 Series



















Отзывы: