Quantum DXi4701, Руководство пользователя

Страница: 343 / 440

Chapter 9: DXi4701 Configuration
System
Quantum DXi4701 User’s Guide 317
• The source DXi management/data IP address, the source DXi
replication IP address, and the target DXi IP address are all on the
same subnet (192.168.10.x).
• To make sure the replication segment is used when communicating
with the target DXi, you must add a host route in the Routing
Details section on the source DXi.
In this example, you would specify the following routing details for
the replication interface on the source DXi:
• Destination - Use the IP address of the target DXi
(192.168.10.200).
• Dest Netmask - Use 255.255.255.255.
• Dest Gateway - Use the replication IP address of the source DXi
(192.168.10.100).
Figure 171 Interface Routing:
Example 2
Example 3: Segments on the Same Subnet and Target on a Different
Subnet
In the example below (see Figure 172 ), the DXi has two segmented
interfaces, one for data and management traffic, and one for replication
traffic:
• The source DXi management/data IP address and the source DXi
replication IP address are on the same subnet (192.168.10.x). The
target DXi IP address is on a different subnet (192.168.20.x)
Source DXi
192.168.10.x subnet
Replication IP:
Target DXi
192.168.10.100
IP: 192.168.10.200
Management/Data IP:
192.168.10.101