Quantum DXi4701, Руководство пользователя

Страница: 336 / 440

Chapter 9: DXi4701 Configuration
System
310 Quantum DXi4701 User’s Guide
Figure 168 Network Page: IP
Address Table
1 Click Add IP to add a network interface to a device.
Or select an interface to edit the IP address, netmask, gateway and
traffic type. (To select an interface, click the radio button next to the
interface index name, for example, bond0:2 .)
Note: A maximum of 10 IP addresses are allowed per device. All
IP addresses in the IP Address Table (added or modified)
must be valid and unique, and must have a valid gateway
and netmask.
2 In the VLAN ID column, select the check box to enable VLAN
tagging for the interface. (Or clear the check box to disable VLAN
tagging for the interface.)
VLAN tagging allows you to assign an interface to a virtual local
area network (VLAN). With VLAN tagging, you can route different
traffic types (management, data, and replication) over different
VLANs, making sure traffic types do not mix.
If VLAN tagging is enabled, enter the
VLAN Tag ID for the interface.
(Valid values are 2 to 4094 . You can assign only one tag ID to an
interface.)
Note: The maximum allowed number of VLAN tag IDs is 64. If you
attempt to add more than 64 VLAN tag IDs, an error
displays.