Quantum DXi4701, Руководство пользователя

Страница: 163 / 440

Chapter 6: DXi4701 Replication
Receive NAS
Quantum DXi4701 User’s Guide 137
Figure 73 Recovered Share
Name Page
2 (Optional) In the Recovered Share Name box, type a new name for
the recovered share. (The default name is the original share name.)
3 Click Apply .
4 If the DXi is joined to a Windows workgroup, select the workgroup
user that will own the recovered share, and then click Apply .
The share is recovered on the target system. All data stored on the share
at the time the snapshot was saved is available. The original export
protocol of the share (NFS or CIFS) is retained in the recovery process.
Note: After you recover a share, if you want to continue backing up
data to the share, you must remap your backup application to
point to the target system instead of the source system.
Performing a Failback For a Share
Perform a failback of a NAS share if a source system that was previously
unavailable becomes available again. When you failback a share, you
select a received snapshot. The DXi4701 copies the snapshot from the
target system back to the source system. You can then perform a
recover operation to recreate the share on the source system just as it
was at the point in time when the snapshot was saved.