Quantum DXi4500, Руководство пользователя

Страница: 129 / 226

Chapter 5: DXi4500 Configuration
Contacts Configuration
Quantum DXi4500 User’s Guide 107
5 Select the Community Status check box to enable this SNMP
community.
6 Click Apply .
An Information page displays indicating the community has been
added.
Test
Use the Test page to send a test SNMP trap.
To send a test SNMP trap:
1 From the SNMP page, click the Test tab.
2 Select an SNMP destination.
3 Click Send to send a test SNMP trap.
The test trap is sent. Verify the destination to ensure the SNMP trap
was sent.
Contacts Configuration
Use the Contacts page to enter company contact information.
To access the Contacts page:
1 From the Configuration menu, click the Contacts tab.
The Company Information page displays (see Figure 40 ).