Quantum DXi-Series Command Line Interface (CLI) Guide
6-66538-03 Rev C
November 2010
VTL Configuration CLI Commands
13
•
Listing of Supported Tape Drive
•
•
•
•
•
•
Listing the Media and Its Attributes
•
•
•
•
•
•
•
•
•
•
•
•
•
List VTL Storage Locations and Index
•
•
•
Listing Existing VTL and
Its Attributes
syscli --list vtl [--name <VTL_name>]]
This CLI command allows the CLI admin to display a list of all existing VTLs on
the system and their attributes when no partition name is specified. If a VTL
name is specified, only that VTL is listed with its attributes. The attribute list
includes the name of the VTL, mode, library model, drive model type, number of
drives, number of media, number of slots, serial number, data deduplication
status (enabled/disabled) and backup window status (enabled/disabled). If the
backup window status is enabled, the list will also include the start and end
time of the backup window.
An example output for a VTL named
myvtl
is shown below:
vtl
count=1
vtl=1
name
=
myvtl
mode
=
offline