background image

42

www.quantumrehab.com

Vibe

V I I I .   O P E R A T I O N

On/Off Key

The  on/off key toggles the system power on and off.

WARNING!  Unless  faced  with  an  emergency

situation, do not use the on/off key to stop the

chair.  This  will  cause  the  power  chair  to  stop

abruptly.

WARNING! Always turn the power off when you

are stationary to prevent unexpected movement.

NOTE: If the joystick is not in the neutral (center) position

when you turn on the power, you may cause a fault in the

system. See “Out Of Neutral At Power Up.”

System Status Light

The system status light is normally on when the system is powered

up, and off when the system is powered down. It will also flash

trouble codes when the system detects a fault. See “Trouble Codes.”

Magnetic Locking Area

Your power chair is equipped with a feature that enables you to

“lockout” unauthorized users. For this function, you will need the

magnetic key supplied with your power chair. If you lose this key,

contact your Quantum Rehab Specialist.

To enable the lockout the system:

1. Hold the magnetic key on or near the key symbol. The system will beep and automatically power down.

NOTE: None of the remote lights should be lit.

2. Press the on/off key to power up the chair. The key symbol will flash, but you will not be able to drive your power chair.

This means that the controller is still locked.

3. Hold the magnetic key on or near the key symbol again to unlock the controller. When the key symbol stops flashing,

you may turn on the power chair.

NOTE: If you turn on the power chair while it is locked and don’t unlock it after one minute, the power chair

will automatically turn off itself.

Battery Condition Meter

The battery condition meter consists of six lights arranged in an arc over the battery icon. From left to right, the first two are

red, the second two are orange and the last two are green. These lights give you an accurate indication of your usable

battery capacity. If the battery has at least 85% of its rated capacity, all of the lights will be on. As the battery voltage drops,

the number of lights reduces from right to left. When the battery capacity drops to 10% or below, all of the lights will flash

once every second.

Figure 26. Europa Master Remote Keypad

Содержание  Quantum Vibe
























































Отзывы: