Manual for KD7E/333series
Appendix
figure-4 Backup process
2 Backup System Partition
It is used to backup the system partition of
current hard disk. It makes a backup of the
data in the bootable partition (actived
partition) of current hard disk, as well as the
partition table.
3 Backup Whole Disk
It makes a backup of all the useful data on
the hard disk, including partition table and the
data in all partitions.
4 Backup CMOS Setup
It is used to backup the settings you have
made in the CMOS Setup.
5 Release Backup Area
It is used to unload the backup data on the
hard disk, freeing the hard disk space.
6 Exit Backup Menu
It is used to Exit Backup Interface.
1 Backup Partition Table
It is used to backup partition table of current hard Disk. A partition table keeps the status
of the hard disk partitions, such as the number of partitions, the type and size of each
partition, etc. It is the most important information of the hard disk data structure. The
incorrectness or loss of the table will result in the failure of reading data from the hard
disk partitions.
Press Recovery Hotkey to enter Recovery Interface duringthe POST(Power On
Self Test), then the follwing interface will appear. You can scroll the highlight bar to
the option you want to work with using arrow key. Press ENTER to confirm.
Recovery Function Introduction
