manualshive.com logo in svg

Quantum Composers 9530 Series, Спецификация, Страница: 3 / 4

Поделиться
Скачать
Quantum Composers 9530 Series Скачать руководство пользователя страница 3

SYSTEM SPECIFICATIONS

4-8 Channels
Independent delays & pulse widths
100 MHz Internal Oscillator
All synchronized with external 

reference clock
Trigger and/or gated operation.

9530 EXTERNAL 

SYNC’D OPERATION

Synchronizer 

Delay Generator

External reference clock input of 50 mV to 2.5 V allows direct syncing to photo diode 

or high speed logic outputs.

Sync’d operation provides very low external jitter operation.

All modes (internal & external trigger, etc.) are available with the external clock.

10 to 100 MHz Ext 

Reference Clock

80 Mhz pulse train 

(1 every ~13 ns)

1 kHz pulse train 

(1 every ~1 ms)

Picked pulses with a 

flexible time window 

(13 ns to 1.3 s)

Amplifier

Pulse Picker

Delay is controlled by delay generator and computer (stepped through for a time trace) 

Jitter greater than ~6 ns will result in unstable picking (pick pulses not intended)

Accuracy poorer than 6 ns will do the same (pick pulses not intended)

 

Toll Free Phone

  

(800) 510-6530 

 

Email

  

[email protected]

 

Fax Phone Line

  

(406) 582-0237 

 

Web 

www.QuantumComposers.com

•  Independent Channel Enable/Disable

•  Delayed Channel Enable - allows flashlamp/ diodes to be 

  fired, stabilizing the laser before the Q-switch or shutter is  

 enabled.

•  Single shot or Burst mode laser pulse bursts, controlling 

  either just the Q-switch or entire laser.

•  Duty cycle mode allows firing laser at an optimal rate, but  

  picking pulses out at the user required rate.

•  Output multiplexer allows the timing of any combination of  

  channels to be output on any of the output ports,  providing 

  very complex pulse trains.  

I/O CONFIGURATION

Models/Outputs  

9534 - 4 independent channel outputs 

 

 

 

9538 - 8 independent channel outputs 

Inputs    

 

2 inputs - 1 trig input / 1 gate input

Memory 

 

24 configuration storage slots

INTERNAL RATE GENERATOR

rate  

 

 

0.0002 Hz to 10.000 MHz

resolution  

 

10 ns

accuracy  

 

1 ns + .0001 x period

jitter    

 

50 ps RMS

settling  

 

1 period

burst mode  

 

1 to 9,999,999 pulses

timebase  

 

100 MHz, low jitter PLL

oscillator  

 

50 MHz, 25 ppm

system output   

single shot, burst, duty cycle, continuous

modes   
pulse control    

internal rate generator, external trigger, external  

modes 

  gate

PROGRAMMABLE TIMING GENERATOR

channel output  

single shot, burst, duty cycle, normal

modes   
control modes   

internally triggered, externally triggered

 

 

 

and external gate each channel may be

 

 

 

independently  set to any of the modes 

output multiplexer  

any/all channels may be multiplexed to any/all  

   outputs
delayed output  

0 to 9,999,999 pulses

timebase  

 

same as internal rate generator

DELAY

range    

 

0 - 1000 s

accuracy  

 

1 ns + .0001 x setpoint

resolution  

 

250 ps

Содержание 9530 Series

Страница 1: ...des the latest in laser timing and synchronization Offering a unique 1U 19 rackmount package with all rear panel connections it is well suited for integration into your rack timing and control systems Key Features 250 ps Timing Resolution 50 ps Channel to Channel Jitter 1U Rackmount Ready Easy Programming Interface 4 or 8 Independent Channel Outputs Free LabVIEW Driver Ethernet USB RS232 Standard ...

Страница 2: ...lexibility in setting up an experiment or synchronizing multiple events Complimentary NI certified LabVIEW drivers available Advanced Features Options Clock input output allows master clock input from 10 MHz to 100 MHz with complete system timing relative to that signal with low jitter Field programmability custom features upgrades and fixes via fully programmable FPGA Settings Programming saved o...

Страница 3: ...h or shutter is enabled Single shot or Burst mode laser pulse bursts controlling either just the Q switch or entire laser Duty cycle mode allows firing laser at an optimal rate but picking pulses out at the user required rate Output multiplexer allows the timing of any combination of channels to be output on any of the output ports providing very complex pulse trains I O CONFIGURATION Models Outpu...

Страница 4: ...y 120 ns output inhibit delay 50 ns jitter 800 ps RMS Other custom modules available Call with your request SYSTEM EXTERNAL TRIGGER GATE INPUT S TRIGGER INPUT function generate individual pulses start a burst or continuous stream rate DC to 1 200 ns longest active pulse slope rising or falling maximum of 5 MHz behavior used to control the internal rate GATE INPUT function pulse inhibit or output i...

Отзывы:

Нет отзывов