Quantronix Cubiscan 110-XT, Руководство по эксплуатации и техническому обслуживанию

Страница: 39 / 78

Operation This option displays functions that can be enabled on the Cubiscan 110-XT.
By tapping the corresponding box on the touchscreen, you can turn on or
off functions which display the dimensional weight, or enable a barcode
scanner, a printer, or auto measure. See
“Operation” on page 31
for more
details.
NOTE
When the Enable Auto Measure feature is selected, an item will be measured
when it is detected on the platform.
In this sub-menu, you can also set the display’s language, regulator setting,
and protocol. You can also set a password to be entered for full
functionality of the Cubiscan 110-XT. See
“Password” on page 33
for more
information on setting the password.
Units You can switch between metric and standard units under the Units
sub-menu. You can also change the dimensional factor to be domestic or
international. Additionally, you can change the dimensioning factor or give
the Cubiscan 110-XT a unique ID by tapping on the numbers to bring up a
keypad. See
“Units” on page 33
for more details.
Ethernet This option displays details about the Ethernet connection, with an option
to post data to a specified URL. See
“Ethernet” on page 34
for more
information, or see the Cubiscan web services manual.
Other The Other option allows you to set the date and time, as well as update
firmware if needed. See
“Other” on page 36
for more details.
Figure 21
Configure sub-menus