6.1 Install the Cohesion Installer software package
Install Cohesion Installer on:
l
the PXIe controller of the PXIe Chassis in which the Quantifi Photonics module(s) will be installed, or
l
the controller PC (multi-chassis MXI setup)
For details on system requirements, refer
To install Cohesion Installer:
1. We recommended that you save your work and close open programs before installing Cohesion Installer.
2. Locate and run
CohesionInstaller-<version_number>.exe
from the provided USB media device (or download it from the Quantifi Photonics
website) and follow the on-screen installation prompts.
3. Select the Installation Type:
CohesionUI with Apache
(this is the default setting)
4. Select the Chassis Mode:
Single Chassis Mode
(this is the default setting). If unsure, select this default setting.
To operate in Multiple Chassis Mode, additional hardware modules are required. As you can change the Chassis Mode later, we recommend to
select
Single Mode
unless all other configuration requirements have been met.
Quantifi Photonics | SLED 1000 / 1300 Series PXIe User Manual | Document version 1.08
17 / 61
