13
|
Ultra
Version M 22-April-2012
FUNCTIONS
1.0 ICE450 Front Panel Controls
Key Switch
ON:
To turn the ICE450 ON, rotate the key to the ON (“I”)
position. With the Key Switch in the ON position, the laser
system is ready for use. The key is not removable when in the
ON position.
OFF:
To turn the ICE450 OFF, rotate the key to the OFF (“O”)
position. Remove the key to keep unauthorized personnel from
operating the laser.
Power ON Indicator
This indicator illuminates when the Key Switch is ON and the
unit is connected to 100–240VAC, 50/60 Hz AC Mains power.
The indicator light is amber colored to ensure visibility through
laser safety goggles.
Emission Warning
When high voltage is activated, or when the simmer supply
enables, this indicator illuminates as a warning that laser
output is possible. The indicator light is amber colored to
ensure visibility through laser safety goggles. The user must
observe laser safety precautions when the Emission Warning
indicator is ON.
Remote Box Interface (RB)
Use this input to connect the Remote Box for access to
settings and operating parameters.
Note:
The emergency stop button is on the Remote Box. The
Remote Box must be connected to the ICE450 or the laser will
not operate.
Figure 6:
ICE450 Front Panel
Key Switch
Power ON indicator
Emission Warning
BNC connectors
Fill/Drain port
Vent port
Reservoir-level
window
Remote Box
connector
Serial interface
(RS-232) port