5
Control
Programm flip switch
The drive unit is supplied with a built-in 3 stage flip switch in the side cover, which allows enabling
the operating modes AUTOMATIC, MANUAL and OPEN.
Operating modes
The following operating modes can be enabled by means of the flip switch:
Program switch position :
1 = Automatic
0 = Manual
2 = Open
AUTOMATIC (position 1)
Automatic opening via the opening elements inside/o Key.
Automatic closing upon expiration of the adjustable hold-open time.
MANUAL (position 0)
The drive mechanism and the control elements are switched off.
The door leaf can be manually opened.
The door leaf is closed by spring power from any position.
OPEN (position 2)
The door leaf is automatically opened and remains in the OPEN position.
The following operating modes can be enabled only by means of terminals on the control unit (see
wiring diagram):
EXIT
The door leaf can only be opened via the opening elements inside (OEI) and Key.
NIGHT
The door leaf can only be opened via the opening element Key (key-operated switch
outside).
