Quantech QWC3050T-200T страница 129 Скачать руководство пользователя

Страница: 129 / 186

SECTION 7 – UNIT CONTROLS

FORM QWC3-NM1

ISSUE DATE:11/20/2020

QUANTECH

129

The ENTRY keys allows the user to view, change

programmed values. The ENTRY keys consist of an

↑ (UP) arrow key, ↓ (DOWN) arrow key, and an EN

TER/ADV key.

Up and Down Arrow Keys

Used in conjunction with the OPER DATA, HISTORY,

COOLING SETPOINTS, SCHEDULE/ADVANCE

DAY, OPTIONS and CLOCK keys, the ↑ (UP) and ↓

(DOWN) arrow keys allow the user to scroll through

the various data screens. See the section on Display/

Print keys for specific information on the displayed in-

formation and specific use of the ↑ (UP) and ↓ (DOWN)

arrow keys.

The ↑ (UP) arrow key, and ↓ (DOWN) arrow key are

also used for programming the control panel such as

changing numerical or text values when programming

cooling setpoints, setting the daily schedule, changing

safety setpoints, chiller options, and setting the clock.

ENTRY KEYS

Enter/Adv Key

The ENTER/ADV key must be pushed after any change

is made to the cooling setpoints, daily schedule, safety

setpoints, chiller options, and the clock. Pressing this

key “enters” the new values into memory. If the EN-

TER/ADV key is not pressed after a value is changed,

the changes will not be “entered” and the original val-

ues will be used to control the chiller.

Programming and a description on the use of the ↑ (UP)

arrow key, and ↓ (DOWN) arrow, and ENTER/ADV

keys are covered in detail under the SETPOINTS, and

UNIT keys.

Содержание QWC3050T-200T



























































































































































































Результаты поиска

Содержание QWC3050T-200T

Отзывы:

Похожие инструкции для QWC3050T-200T

Бренды по названию

Популярные бренды

Quantech QWC3050T-200T, Установка, эксплуатация и обслуживание

Результаты поиска

Содержание QWC3050T-200T

Отзывы:

Похожие инструкции для QWC3050T-200T

Бренды по названию

Популярные бренды