Quantech QWC3050T-200T страница 16 Скачать руководство пользователя

Страница: 16 / 186

FORM QWC3-NM1

ISSUE DATE: 11/20/2020

SECTION 2 – PRODUCT DESCRIPTION

QUANTECH

ACCESSORIES AND OPTIONS
Power Options

Single Point Supply Terminal Block

The standard power wiring connection on all models

is a single point power connection to a factory pro-

vided terminal block. Components included are the

enclosure, terminal-block and interconnecting wiring

to the compressors. Separate external protection must

be supplied, by others, in the incoming power wiring.

(Do not include this option if either the Single-Point

Non-fused Disconnect Switch or Single-point Cir-

cuit Breaker options have been included.) (

Factory-

Mounted

)

Single Point Non-Fused Disconnect Switch

An optional unit-mounted disconnect switch with ex-

ternal, lockable handle (in compliance with Article

440-14 of N.E.C.), can be supplied to isolate the unit

power voltage for servicing. Separate external fusing

must be supplied, by others in the power wiring, which

must comply with the National Electrical Code and/or

local codes. (

Factory-Mounted

)

Single Point Circuit Breaker

An optional unit mounted circuit breaker with external,

lockable handle (in compliance with N.E.C. Article

440-14), can be supplied to isolate the power voltage

for servicing. (

Factory-Mounted

)

Multiple Point Circuit Breaker

Optional multipoint supply with independent system

circuit breakers and locking external handles (in com-

pliance with Article 440-14 of N.E.C) can be factory

supplied. Selecting this option also selects optional

compressor external overload for reduced MCA.

(Fac-

tory-Mounted)

Control Transformer

Converts unit power voltage to 115-1-60 (0.5 or 1.0

KVA capacity). Factory mounting includes primary

and secondary wiring between the transformer and the

control panel. (

Factory-Mounted

)

Compressor External Overloads

Optional compressor motor overloads can be factory

mounted in the unit control/power panel. This option

will reduce the chiller MCA (minimum circuit ampac-

ity) and allow for reduced wire sizing to the unit. This

option is not available for applications with Leaving

Condenser Water Temperature (LCWT) greater than

110ºF (43ºC). (

Factory-Mounted

)

Controls Options

Building Automation System Interface

A standard feature of the QWC3 control panel to ac-

cept a pulse width modulated (PWM), 4 to 20 milli-

amp, or 0 to 10VDC input to reset the leaving chilled

liquid temperature from a Building Automation Sys-

tem. (

Factory-Mounted

)

Language LED and Keypad

Standard display language and keypad is in English.

Spanish, French, German, and Italian are available as

an option. (

Factory-Mounted

)

Heat Exchanger Options

Flow Switch

An optional flow switch can be factory supplied for the

evaporator. Vapor-proof SPDT, NEMA 3R switch, 150

PSIG (10.3 bar) DWP, 20°F to 250°F (-29°C to 121°C)

with 1” NPT (IPS) connection for upright mounting in

horizontal pipe. The flow switch or its equivalent must

be furnished with each unit. (

Field mounted

)

Differential Pressure Switch

This is an alternative option to the paddle-type flow

switch. It has a 3 to 45 PSIG (0.2 to 3 bar) range with

¼" NPTE pressure connections. (

Field Mounted

)

Pressure Vessel Codes

Evaporators and condensers are to be supplied (stan-

dard) in conformance with the A.S.M.E. pres sure

codes.

Raised Face Flange (ANSI/AWWA C-606 Type)

Consists of (4) flange adapters for grooved end pipe on

evaporator and condenser (note: the 0056SE, 0064SE,

and 0074SE units do not include condenser flanges).

Standard 150 psi (10.3 bar).
(Field mounted, matching pipe flange by contractor.)

Double Thick Insulation

Double thick (1-1/2") insulation provided on the evap-

orator. (

Factory-Mounted

)

Содержание QWC3050T-200T



























































































































































































Результаты поиска

Содержание QWC3050T-200T

Отзывы:

Похожие инструкции для QWC3050T-200T

Бренды по названию

Популярные бренды

Quantech QWC3050T-200T, Установка, эксплуатация и обслуживание

Результаты поиска

Содержание QWC3050T-200T

Отзывы:

Похожие инструкции для QWC3050T-200T

Бренды по названию

Популярные бренды