manualshive.com logo in svg

Quantech QCC2015CEE, Инструкция по установке, эксплуатации и обслуживанию, Страница: 9 / 172

Поделиться
Скачать
Quantech QCC2015CEE Скачать руководство пользователя страница 9

QUANTECH

9

Form QCC2-NM1 

Issue Date: 5/20/2021

1

Section 1 – General equipment information and safety

Introduction

The 15 ton to 80 ton (50 kW to 280 kW) QCC2 models 

are shipped complete from the factory ready for field 

installation.
The unit is pressure-tested, evacuated and given a ni-

trogen holding charge and includes an initial oil charge 

(R-410A refrigerant supplied by others). After assem-

bly, an operational test is performed to ensure that each 

control device operates correctly.
The unit structure is heavy-gauge, galvanized steel. 

This galvanized steel is coated with baked-on pow-

der paint which, when subjected to ASTM B117 1000 

hour salt spray testing, yields a minimum ASTM 1654 

rating of “6”. Units are designed in accordance with 

NFPA 70 (National Elec tric Code), ASHRAE/ANSI 15 

Safety code for mechanical refrigeration, and are cETL 

listed. All units are produced at an ISO 9000-registered 

facility.

Compressors

The condensing unit has suction-gas cooled, hermet-

ic, scroll com pressors. The compressors incorporate 

a compliant scroll design in both the axial and radial 

direction. All rotating parts of the compressors are 

statically and dynamically balanced. A large internal 

volume and oil reservoir pro vides greater liquid toler-

ance. Compressor crankcase heaters are also included 

for extra protection against liquid migration.

Condenser
Coils

Fin and tube condenser coils of seamless, inter nally-

enhanced, high-condensing-coefficient, corrosion re-

sistant copper tubes are arranged in staggered rows, 

mechanically expanded into aluminum fins. Integral 

subcooling is included. The design working pressure 

of the coil is 650 psig (45 barg).

Low sound fans

The condenser fans are composed of corrosion resis-

tant aluminum hub and composite blades molded into 

a low noise airfoil section. They are designed for maxi-

mum efficiency and are statically and dynamically bal-

anced for vibration-free operation. They are directly 

driven, and positioned for vertical air discharge. The 

fan guards are constructed of heavy-gauge, rust-resis-

tant, PVC (polyvinyl chloride)-coated steel wire.

Motors

The fan motors are Totally Enclosed Air-Over, squirrel-

cage type, current protected. They feature ball bearings 

that are double-sealed and permanently lubri cated.

Refrigerant circuit

All unit piping will be copper with brazed joints. The 

liquid line will include a field connection shutoff valve 

with charg ing port located on each condenser circuit. 

Suction line connections are provided on each refrig-

eration circuit. A filter drier and sight glass are shipped 

loose for field installation on each refrigerant circuit.
All expansion valves, liquid line solenoid valves, 

refriger ant, and refrigerant field piping are supplied by 

others.

Warranty

Quantech warrants all equipment and materials against 

defects in workmanship and materials for a period of 

eighteen months from date of shipment, unless labor 

or extended warranty has been purchased as part of the 

contract.
The warranty is limited to parts only replacement and 

shipping of any faulty part, or sub-assembly, which has 

failed due to poor quality or manufacturing errors. All 

claims must be supported by evidence that the failure 

has occurred within the warranty period, and that the 

unit has been operated within the designed parameters 

specified.
All warranty claims must specify the unit model, serial 

number, order number and run hours/starts. Model and 

serial number information is printed on the unit identi-

fication plate.
The unit warranty will be void if any modification to 

the unit is carried out without written approval from 

Quantech.
For warranty purposes, the following conditions must 

be satisfied:

•  The initial start of the unit must be carried out by 

trained personnel from an Authorized Quantech 

Service Representative 

(see SECTION 6 – COM-

MISSIONING).

•  Only genuine QUANTECH approved spare parts, 

oils, coolants, and refrigerants must be used. 

Содержание QCC2015CEE













































































































































































Отзывы:

Нет отзывов