Quick Start Guide
www.pi-solo.com
Freedom of Perspective
The world's first immersive lifestyle camera
for smartphone.
Important safety information
1. Using or connecting non-genuine products might shorten the lifespan of the
product, or cause explosions. Doing so might also damage the product and
further void the warranty.
2. Do not disassemble the product or allow any object to collide with the
product. This may cause electric shocks, short-circuit or cause a fire.
3. Please use this product between temperature conditions 0
℃
to 35
℃
. Avoid
exposing the product to direct sunlight for extended periods of times. This may
cause damages to the product or explosions.
4. Please wipe this product with soft cloth. Keep the camera in the storage bag
when not in use.
5. Do not connect or insert conductive material (metal components or pencil
led etc.) into the connector.
6. Do not cover the product with a blanket when in use.
7. The product might heat up after long-term use. Avoid touching the product
when it heats up as doing so may result in low temperature burns.
8. The camera might heat up when recording videos for extended periods of
times. The camera may cease operation in order to prevent damages due to
high temperatures.
9. Do not discard the product as household waste. Doing so may cause fire or
harm the environment.
Limited Warranty
Contact us
One year standard limited warranty is provided for this product starting
from the date of sale, guaranteeing that there are no material, manual
or design flaws for the hardware and accessories included in the
original product package. This warranty is not applicable to (1) batteries
and other consumable components, unless there is flaw in the material
itself; (2) cosmetic damages, including but not limited to scratches and
dents on the surface; (3) damages resulted from using with another
product or with non-genuine accessories. (4) Damages caused by
external factors such as accidents, improper use or improper handling.
Or (5) Removed, incomplete or unidentifiable product serial number
label. Please visit our website at www.pi-solo.com for more information.
Micro SD card installation
Remark: Supports Class10 and above, FAT32 format and a
maximum capacity of 64GB.
Downloading the
Pi-SOLO application program
Android
ios
Remark: The serial number printed at the bottom of the
camera is the wireless network name and password.
Wireless network name (SSID): EY5XW1634SSS
Password: XW1634SSS
EY5XW1634SSS
Product components
Pi SOLO Camera
Smartphone holder
Lens cap and wire
Micro USB to Micro USB cable
B
B
Micro USB to Type C USB cable
B
Micro USB to Type A USB cable
B
Quick Start Guide
Quick Start Guide
www.pisolo.com
Protective pouch
Smartphone holder tripod extender
Camera operation
instructions
Power button (shutter)
• Press the power button when the camera
is off to turn it on
• Press the power button to take photos
once the camera is on
• Press and hold down the power button for
two seconds to switch to recording mode;
release the power button before holding it
down for five seconds to start recording
• If the power button is pressed and held
down for over five seconds, the camera will
automatically enter the shutdown process
Power indicator
• Once the power is turned on, the power
button will remain green constantly
• While powering on, the power button will
flash green
• When there is less than 20% power
remaining, the power button will remain
yellow constantly
• When there is less than 10% power
remaining, the power button will remain red
constantly
• When there is less than 5% power
remaining, the power button will flash red
Recording indicator /
countdown indicator
Memory card slot and
Micro USB port
Tripod mounting hole
