Chapter 3
37
KEEX-6100 Series User’s Manual
Chapter 3
System Installation
Expansion Interfaces
1x full size mini-PCIe slot supported
1x connector onboard for SIM card signals supported
NOTE
When adding or removing expansion cards, make sure that you unplug the
power supply first. Meanwhile, read the documentation for the expansion card
to configure any necessary hardware or software settings for the expansion
card, such as jumpers, switches or BIOS configuration.
Memory Module Installation
Carefully follow the steps below in order to install the DIMMs:
1.
To avoid generating static electricity and damaging the SO-DIMM, ground
yourself by touching a grounded metal surface or use a ground strap before you
touch the SO-DIMM.
2.
Do not touch the connectors of the SO-DIMM. Dirt or other residue may cause a
malfunction.
3.
Hold the SO-DIMM with its notch aligned with the memory socket of the board
and insert it at a 30-degree angle into the socket.
Figure 6 Align the SO-DIMM Memory Module with the onboard socket
