Chapter 2
24
KEEX-6100 Series User’s Manual
Jumper Settings
To ensure correct system configuration, the following section describes how to set
the jumpers to enable/disable or change functions. For jumper descriptions, please
refer to the table below
.
Table 2 Jumper List
Label
Function
JP1
ME F/W Selection
JP2
Panel & Backlight Power Selection for LVDS2
JP3
Panel & Backlight Power Selection for LVDS1
JP4
Backlight Power Enable Selection for LVDS1
JP5
Backlight Power Enable Selection for LVDS2
JP6
AT / ATX Mode Selection
JP7
SRTC Reset Selection
JP8
RTC Reset Selection
Table 3 JP1 ME F/W Selection
1
2
Jumper
Status
1-2 Open
Normal Operation.
1-2 Short
ME F/W Disabled.
Pitch:2.54mm [YIMTEX 3321*02SAGR(6T)]
Table 4 JP2 Panel & Backlight Power Selection for LVDS2
2
1
6
5
Jumper
Setting
Function
1
1-3
Backlight Power = +12V
3-5
Backlight Power = +5V
2
2-4
Panel Power = +3.3V
4-6
Panel Power = +5V
Pitch:2.54mm [YIMTEX 3362*03SAGR]
