background image

Preface

12

KEEX-6100 Series User’s Manual

area (domestic environment) is likely to cause harmful interference, in which case 

the user will be required to correct the interference (take adequate measures) at 

their own expense.

Changes or modifications not expressly approved by Quanmax could void the user's 

authority to operate the equipment.

NOTE 

The assembler of a personal computer system may be required to test 

the system and/or make necessary modifications if a system is found to 

cause harmful interference or to be noncompliant with the appropriate 

standards for its intended use.

„

Warranty Policy

Limited Warranty

Quanmax Inc.’s detailed Limited Warranty policy can be found under Support at 

www.quanmax.com. Please consult your distributor for warranty verification.

The limited warranty is void if the product has been subjected to alteration, neglect, 

misuse, or abuse; if any repairs have been attempted by anyone other than 

Quanmax or its authorized agent; or if the failure is caused by accident, acts of God, 

or other causes beyond the control of Quanmax or the manufacturer. Neglect, 

misuse, and abuse shall include any installation, operation, or maintenance of the 

product other than in accordance with the user’s guide.

No agent, dealer, distributor, service company, or other party is authorized to change, 

modify, or extend the terms of this Limited Warranty in any manner whatsoever. 

Quanmax reserves the right to make changes or improvements in any product 

without incurring any obligation to similarly alter products previously purchased.

Return Procedure

For any Limited Warranty return, please contact Support at www.quanmax.com and 

login to obtain a Return Material Authorization (RMA) Number. If you do not have an 

account, send an email to [email protected] to apply for one.

All product(s) returned to Quanmax for service or credit must be accompanied by a 

Return Material Authorization (RMA) Number. Freight on all returned items must be 

prepaid by the customer who is responsible for any loss or damage caused by 

common carrier in transit. Returns for Warranty must include a Failure Report for 

each unit, by serial number(s), as well as a copy of the original invoice showing the 

Содержание KEEX-6150 Series




























































Отзывы: