QUAN SHENG TG-007, Руководство пользователя, Страница: 16 / 35

FUNCTION OPERATION AND DESCRIPTION
FUNCTION OPERATION AND DESCRIPTION
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
Auto Backlight（ABR）——Menu No.6
1. In frequency or channel mode, press Menu+6, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose the backlight display time(1-5s). The LCD
displays:
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
This function can adjust the auto off time after radio display backlight is on.
The operation steps are as follows:
We suggest you set 4-5 levels.
⊙
!
NOTE
!
NOTE
In dual-watch operation mode, you can change the parameter of AB channel or frequency freely.
⊙
Dual-watch Operation（TDR）——Menu No.7
1. In standby mode, press Menu+7, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose ON, the LCD displays:
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
The LCD displays:
When this function is on, you may receive the signal of channel A and channel B at the same time.
If any AB channel or frequency receives signal, “▲” will glitter on corresponding channel or
frequency.Example：Channel A: 460.125MHz，Channel B: 151.235 MHz ，The LCD displays:
or
The operation steps are as follows:
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
VOX Function（VOX）——Menu No.4
1. In frequency or channel mode, press Menu+4, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose VOX level. The LCD displays: There
are (OFF-10) levels. OFF:OFF 10: Lowest level 1: Highest level
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby. The LCD
displays:
When this function is on, the system will recognize your talking to the microphone and then it will
automatically shift to transmitting mode without manual operation (This function is useful for
earphone users).
The operation steps are as follows:
!
NOTE
The higher level is, the higher sensitivity of microphone is.This function is invalid
in scanning and FM radio mode.
⊙
!
NOTE
The radio normally use wide band. In
channel mode, this function is invalid.
⊙
Wide/Narrow Bandwidth（W∕N）——Menu No.5
1. In frequency mode, press Menu+5, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose wide or narrow bandwidth.
The LCD displays: WIDE: 25KHz NARR：12.5 KHz
3. After setting, press key Menu to confirm, and then
press key PTT or Exit to standby.
This function is used to set the working bandwidth of the radio.
The operation steps are as follows:
4
VOX
OFF
4
VOX
5
400.875
136.225
VOX
5
WN
WIDE
5 WN
NARR
6
ABR
OFF
6
ABR
3
3 460.125
151.235 4
460.125
151.235
7
TDR
OFF
7
TDR
ON
3 460.125
151.235
4
S
25
26