Qualstar XLS-810160, Руководство по установке

Страница: 140 / 208

10.5 Entering Configuration Information
10-26 501801 Rev. 07-01-19
4. Press Save Changes to save the information.
10.5.4 Entering Administrator Information
This section describes how to view and edit administrator information for the physical
library. The physical library administrator is the person who has permission to perform
administrative tasks on the entire XLS library.
To view or edit administrator information for the physical library, follow these steps:
1. Access the Configuration portlet as described in Section 10.5.1 on page 10-22 .
2. Select View/Edit Administrator Information . The View/Edit Administrator
Information page opens, as shown in Figure 10-25 .
3. View or edit the administrator information for the library. Required fields are
denoted by an arrow.
4. Press Save Changes to save the information.
Important: The information listed for the Physical Library
Administrator fields is for display purposes only. The
XLS does not use this information. If you want the user
listed to have permission to perform administrator
tasks, you must define him or her as a library user and
assign him or her to the appropriate user group. Refer to
the
XLS-810160/810240 Tape Libraries User’s Guide
for more information.
Figure 10-25 View/Edit Administrator Information page