Quality Heating QH-HH-L, Руководство пользователя

Страница: 19 / 43

Some parts of this product can become very hot and cause burns. Particular attention has to
be given where children and vulnerable people are present.
Its dangerous of installation close to curtains and other combustible materials.
To avoid the possibility of burns, the following people should be much more careful when using the
heaters: infants and kids, people with sensitive skin, the old, the sick, people who is drunk, people
who takes sleeping pills.
•
Remove the protective film(on the front) before using.
•
Be sure the usage voltage is between 220-240V, 50Hz, and power supply has been strictly in accordance
with IEC, left is null wire and right is live wire, and also well grounded.
•
The devices will draw more current than small appliances, so a separate 5A socket is required.
•
Do not use the device in potentially explosive rooms.
•
Do not use the device in aggressive atmosphere.
•
Set the device up in an upright and stable position.
•
Let the device dry out after a wet clean. Do not operate it
when wet.
•
Do not use the device with wet or damp hands.
•
Do not expose the device to directly squirting water.
•
Never insert any objects or limbs into the device.
•
Do not cover or transport the device during operation.
•
Do not sit on the device.
•
This appliance is not a toy! Keep away from children and animals. Do not leave the device unattended
during operation.
•
Check accessories and connection parts for possible damage prior to every use of the device. Do not use
any defective devices or device parts.
•
Ensure that all electric cables outside of the device are protected from damage (e.g. caused by animals).
Never use the device if electric cables or the power connection are damaged!
•
The electrical connection must correspond to the specifications in chapter Technical data.
•
Do not use the device when the socket or wire overloaded.
•
Observe the device's power input, cable length and intended use when selecting extensions to the power
cable. Completely unroll extension cables. Avoid electrical overload.
•
Before carrying out maintenance, care or repair work on the device, remove the mains plug from the mains
socket or disconnect the circuit.
•
Switch the device off and disconnect the power cable from the main socket when the device is not in use.
•
Do not use the device under any circumstances if any damages on the mains plug or power cable. If the
supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard. Defective power cables pose a serious health risk.
•
During the installation of the device observe the minimum distances from walls and other objects as well as
the storage and operating conditions specified in the Technical data chapter.
•
Never drill into the heating device.
•
Do not use the device in immediate proximity to curtains.
•
Do not place the device on combustible ground.
•
Do not transport the device during operation.
•
Do not touch the surface during the device working to avoid burns.
•
Allow the device to cool down before transport and / or maintenance work.