Quadra-Fire Quadra-Fire VOYAGEUR-MBK, Руководство по установке

Страница: 21 / 32

August 3, 2015 7063-513E 21
VOYAGEUR
Corner Brackets
Figure 21.2
Figure 21.3
Strain Relief for
Blower Cord and
Cover Plug for hole
in each side
Secure 2 Sides to Top
Mounting Tabs
Slide into Slots
on Firebox Face
Secure to
Firebox Face
Heat Deflector
5/16 Nuts
Attachment
Bar
5/16 Bolts
Figure 21.1
E. Securing Appliance to Stove Pipe/Liner
1. Once you have the appliance in place and secured,
remove the tube channel assembly, baffl e board and
ceramic blanket.
2. Reach up through the fl ue opening and grab the attach-
ment bar and pull down inside fl ue opening. Figure 21.1.
2. Insert the 5/16 bolts inside the cast fl ue and through the
chimney mounting bar. Securely tighten the nuts. Fas-
teners are provided.
3. Re-install the tube channel assembly, baffl e board,
ceramic blanket and baffl e protection channel.
F. Surround & Trim Kit Installation
Standard Size: 43 in. W x 31 in. H
Large Size: 51 in. W x 34 in. H
1. Lay surround face down on a protected surface to pre-
vent scratching.
2. Using a 4 to 6 inches long Phillips head screw driver
attach the side surrounds to the top surround using (2)
#8 sheet metal screws on each side provided with the kit.
Figure 21.3 .
3. Lay the trim face down and place the corner brackets into
position.
4. Using a standard fl at screw driver tighten the corner
brackets. Figure 21.2 .
5. Slide the assembled trim set over the surround set. and
then over the appliance matching the mounting tabs on
the side pieces with the slots on the appliance.
Figure
21.3.
6. Align the 2 screws in the top surround piece to the 2
alignment holes on the appliance top. Secure in place.
Figure 21.3 .
7. Use the strain relief in the surround side for blower cord
installation and use the cover plug to insert into the hole
where the blower cord is not installed.