Quadra-Fire 4300 Series Скачать руководство пользователя страница 1

Страница: 1 / 36

February 19, 2020

7037-801B

4300 SERIES

WOOD APPLIANCES

AUTOMATIC COMBUSTION

CONTROL (ACC)

MODEL NUMBERS:

43M-ACC-C

43ST-ACC-C

Installation Manual

Installation & Appliance Set-Up

INSTALLER: Leave this manual with party responsible for use and operation.

OWNER: Retain this manual for future reference.

NOTICE: DO NOT DISCARD THIS MANUAL

Installation and service of this appliance should be performed by

qualified personnel. Hearth & Home Technologies recommends

HHT Factory Trained or NFI certified professionals.

HOT SURFACES!

Glass and other surfaces are hot during

operation AND cool down.

WARNING

Hot glass and appliance will cause burns.

• Do not touch glass until it is cooled

• Use leather gloves when reloading fuel

• NEVER allow children to touch glass

• Keep children away

• CAREFULLY SUPERVISE children in same room

as appliance.

• Alert children and adults to hazards of

high temperatures

• High temperatures may ignite clothing or other

flammable materials.

• Keep clothing, furniture, draperies and other

flammable materials away.

WARNING

Fire Risk.

For use with solid wood fuel only.

Other fuels may over fire and generate

poisonous gases (i.e. carbon monoxide).

If the information in these instructions is

not followed exactly, a fire could result

causing property damage, personal injury,

or death.

WARNING

•

Do not store or use gasoline or other flammable

vapors and liquids in the vicinity of this or any

other appliance.

•

Do not over fire

- If appliance or chimney connector

glows, you are over firing. Over firing will void

your warranty.

•

Comply with all minimum clearances to combustibles

as specified.

Failure to comply may cause house fire.

NOTE:

To obtain a French translation of this

manual, please contact your dealer or visit

www.quadrafire.com

REMARQUE :

Pour obtenir une traduction française de

ce manuel, s’il vous plaît contacter votre

revendeur ou visitez

www.quadrafire.com

Содержание 4300 Series





































Результаты поиска

Содержание 4300 Series

Отзывы:

Похожие инструкции для 4300 Series

Бренды по названию

Популярные бренды

Quadra-Fire 4300 Series, Руководство по установке

Результаты поиска

Содержание 4300 Series

Отзывы:

Похожие инструкции для 4300 Series

Бренды по названию

Популярные бренды