B1
Accessories per
module
People
Tools supplied
Accessories per column
Accessories per
locker facility
x 2
x 2
Stacking and numbering rules
Module types
Type 3S
Type L+XS
Type 2M
Assemble the modules in the order defined in your installation
plan (lockers are numbered from top to bottom and from left to
right).
A1
Bottom
A2
B3
Locker 1
Locker 7
Locker 8
Locker 10
Locker 11
Locker 21
Locker 20
Locker 24
Maximum modules per column = 4
Position 4
Position 1
Position 2
Position 3
Position 4
Position 1
Position 2
Position 3
Module
type [L+XS]
prohibited
Bottom
Back
Transport wedges
Push the module towards the back until it stops.
x 2
Remove the transport wedges from underneath
the module.
Type C LR14 alkaline
batteries
Locker labels
x 4
Caps
x 4
Feet
x8
[B]
x 8
Feet fixing
screws
d
x 2
Clips
Service door key
Place the foot fixing screws
(b)
in the holes of the foot
(a)
.
Back
Type 4XS
x 2
Feet connectors
Cleaning
wipes
Spanner
g
Recommended batteries:
Duracell Pro
A7
If there is going to be a column adjoining
this one, use the feet connectors
(e)
.
A8
Repeat steps
A1
to
A7
for the
other position 1 modules.
A3
Screw the foot in fully.
A4
Repeat steps
A1
to
A3
for the three remaining feet. Turn the module over and put it in its final
location.
Bottom
Top
x 2
A5
Tighten the feet fixing screws with the service door key
(f)
.
Ensure that the module is stable. If not, adjust the foot that is not
in contact with the floor using the spanner
(g)
.
A6
g
Stacking of
position 2/3/4
modules
Position 4
B
Position 3
Position 2
Position 1
B2
Bottom
Top
x 2
Turn the module over then place it on top of the
module below.
Preparing position 1
modules
Position 4
A
Position 3
Position 2
Position 1
Parcel Pending Lite
Hardware Installation Guide