MACH-6
QUICK START GUIDE
STEP 1
STEP 2
STEP 3
A0127743/D - 07/04/2020
1/10
Unpack Your MACH-6:
Remove the printer and accessories
from the packaging. Store the packing
material in a safe place.
Set the printer onto a stable, level
surface. Use a carpenter’s level to
make any adjustments to the work
table where the MACH-6 will be
operating. Level is very important to
the proper operation of the printer.
Do not move the MACH-6 while the
power is on.
It is critical that you read and
understand the MACH-6 User Guide.
Improper use can result in damage to
the unit.
Remove Shipping Materials:
WARNING:
DO NOT PLUG IN OR POWER UP THE
PRINTER BEFORE REMOVING THE YELLOW
ZIP-TIES! DAMAGE TO PRINTER MAY
RESULT!
Please remove packing materials as
shown below.
Open the Printhead Door.
Remove the Foam Shipping Block.
Carefully cut and remove the two
yellow
zip-ties as shown below.
Do
NOT
cut black or white zip-ties.
Locate the Print Platens (two) and Drip
Tray in the accessory box (wrapped in
foam). See User Guide for selecting the
appropriate Platen and installing the
Print Platen and Drip Tray Assembly
into printer.
Locate the Media Side Guides and
Rear Media Support Guide/Sled in the
accessory box (wrapped in foam).
See User Guide for installation
instructions.
When complete, your machine should
look like this:
OVER
Install Print Platen and Drip Tray
Assembly & Media Guides:
Print Platen and
Drip Tray Assembly
