quadient iX-5 Series Скачать руководство пользователя страница 311

Страница: 311 / 328

How to Clear Mail Jammed in the Auto-Feeder

Envelopes are stopped in the Auto-Feeder.

• Mail piece is too thick.

• Mail size is incorrect.

• Too many envelopes are on the feed deck.

• Envelopes are not properly inserted onto the feed deck.

To clear mail jammed in the Auto-Feeder:
1.

Open feeder cover.

On model without sealer, hold the two blue levers to raise the mail path guides

and rollers.

On a feeder with sealer, push down on the blue handle then lift up the drive

assembly.

If necessary, pull up the brush release lever and remove the brush assembly.

306

| Page 306 | Jun-21-2021 12:11 |

Troubleshooting

Содержание iX-5 Series









































































































































































































































































































































Результаты поиска

Содержание iX-5 Series

Отзывы:

quadient iX-5 Series, Руководство пользователя, Страница: 311 / 328

Результаты поиска

Содержание iX-5 Series

Отзывы: