quadient IS-330 Скачать руководство пользователя страница 8

Страница: 8 / 184

Read this First

Safety Requirements

Power Connection

Before connection, check whether the Mailing System is suitable for the local AC

power voltage; refer to the type plates at the back of each system component.

•

Use an outlet located near the system that is easily accessible. As the power

supply cord is the system disconnecting device, do not route the power cord

between pieces of furniture or over sharp edges.

•

Avoid using outlets controlled by wall switches or shared by other equipment.

•

Make sure there is no strain on the power supply cord.

Compliance

Energy Star compliance

Your mailing machine is Energy Star compliant: it helps you to save energy and

money while protecting the environment.

1.2

Safety Requirements

THIS SYSTEM MUST BE GROUNDED

•

Only connect the power plug to an outlet provided with a pro-
tective ground contact.

•

To reduce the risk of fire, use only the power cord supplied with
the Mailing System.

•

Do not use ground adaptors.

•

Do not use this product on a wet floor or near water.

•

In case of liquid spillage, disconnect the power cord from the
outlet and proceed with cleaning.

Содержание IS-330

























































































































































































Результаты поиска

Содержание IS-330

Отзывы:

quadient IS-330, Руководство пользователя, Страница: 8 / 184

Результаты поиска

Содержание IS-330

Отзывы: