quadient DS-200iQ Скачать руководство пользователя страница 63

Страница: 63 / 130

JUN 2020

USER GUIDE

OPERATOR INSTRUCTIONS

DS-200iQ / DS-600iQ

REV 00

5.1

SETTING UP A JOB

The following setup adjustments must first be made in order for the machine to run

correctly to suit the material form size (stationery) being processed.

5.1.1

LOADING THE ENVELOPE HOPPER

Load the required envelopes needed for processing (flaps forward facing)

into the envelope hopper as shown in Figure 5.1.

QTL-RND-OPS-00000109-A-00

Figure 5.1 – Loading the envelope hopper

2. The conveyor will automatically move the loaded envelopes forward.

Adjustments to the envelope hopper side guides may be needed to suit the envelope

size being processed.

3. Use the adjustment wheel as shown in Figure 5.2, and adjust the side guides

at the feed end of the conveyor to an approximate clearance of 1 - 2mm on

each side of the envelope.

QTL-RND-OPS-00000110-A-00

Figure 5.2 – Adjusting the envelope hopper side guides

NOTE:

The guides move in unison when being adjusted, ensuring the envelopes being

processed are fed through correctly and centred.

The side guides taper towards the output exit of the conveyor.

Ensure the guides are adjusted at the feed end of the conveyor to

ensure envelopes are fed through freely and unrestricted.

Содержание DS-200iQ



































































































































Результаты поиска

Содержание DS-200iQ

Отзывы:

quadient DS-200iQ, Руководство пользователя, Страница: 63 / 130

Результаты поиска

Содержание DS-200iQ

Отзывы: