quadient DS-200iQ, Руководство пользователя, Страница: 34 / 130

28
JUN 2020
USER GUIDE
3 INTEGRATED MAIL OPERATING SYSTEM (IMOS) DS-200iQ / DS-600iQ
REV 00
3.4.2 JOB COUNT SETTINGS
Pressing the ‘ Job Count ’ button from the Run screen will display the Job Count settings
as shown in Figure 3.30.
QTL-RND-SCR-00000066-A-00
Figure 3.30 – Job count settings
NOTE:
Current job count will display until the job has been changed, even if the
machine has been switched off and back on again.
1. Press the ‘ Reset ’ button to zero the count if required.
2. Press ‘ Change total ’ to set the total for the job.
NOTE:
If the job count total is set at ‘ 0 ’, the machine will run without stopping.
3. Press ‘ Ok ’ once the desired settings have been made.
3.4.3 BATCH COUNT SETTINGS
Pressing the ‘ Batch Count ’ button from the Run screen will display the Batch Count
settings as shown in Figure 3.31.
QTL-RND-SCR-00000062-A-00
Figure 3.31 – Batch count settings
1. Firstly, set the exit used for batching (if required).
NOTE:
Exits 2 & 3 appear only if Sorters are fitted.
2. Set batch mode from the list of options:
▪ Stop
▪ Continue
NOTE:
‘ Continue ’ will pause the machine for the specified batch complete pause time,
then resume, however the conveyor will continue to run during the pause time.
‘
Stop ’ will stop the machine, press ‘ Run ’ to resume.
3. Set batch to ‘ Batch ’ or ‘ Batch Off ’.