manualshive.com logo in svg

quadient DS-200iQ, Руководство пользователя, Страница: 33 / 130

Поделиться
Скачать
quadient DS-200iQ Скачать руководство пользователя страница 33

27

JUN 2020

USER GUIDE

3

INTEGRATED MAIL OPERATING SYSTEM (IMOS)

DS-200iQ / DS-600iQ

  

REV 00

3.4.1.3  ENVELOPE STOP POSITION

After pressing ‘

Envelope stop position

’, the machine will feed an envelope into position.

This allows the operator to adjust the stop position of the envelope at insert as 

demonstrated in Figure 3.28.

QTL-RND-SCR-00000060-A-00

Figure 3.28  –  Envelope stop position

Make any adjustments as necessary by following the procedure below:

1.  Use the ‘

-

’ or ‘

+

’ button to adjust the position.

NOTE:

‘

+

’ Moves the envelope further into insert position.

2.  If required, press ‘

Revert

’ to revert back to the default setting.

3.  Press ‘

Exit

’ once the desired settings have been made.

3.4.1.4  FINGER ADJUST

After pressing ‘

Finger Adjust

’, the machine will feed an envelope into position.

This allows the operator to adjust the width of the outer fingers as demonstrated

in Figure 3.29.

QTL-RND-SCR-00000061-A-00

Figure 3.29  –  Finger Adjust

Make any adjustments as necessary by following the procedure below:

1.  Use the ‘

-

’ or ‘

+

’ button to adjust the width of the outer fingers.

2.  If required, press ‘

Revert

’ to revert back to the default setting.

3.  Press ‘

Exit

’ once the desired settings have been made.

Содержание DS-200iQ



































































































































Отзывы:

Нет отзывов