quadient DS-200iQ Скачать руководство пользователя страница 13

Страница: 13 / 130

JUN 2020

USER GUIDE

INTRODUCTION

DS-200iQ / DS-600iQ

REV 00

2.3.1

INSERT HEAD COMPONENTS

Insert Head collates all documents in a pocket before insertion, feeds the envelope,

inserts the pack and seals the flap.

Envelope Feeder

Envelope Feeder holds up to 800 envelopes (DL). It is fitted with a sensing conveyor

that operates on demand to move the envelope stack forward.

Collation and Insertion Area

Folded forms either separately or in groups, are collated here into one pack (along

with enclosures) by the collate pocket. The pack is then inserted into the envelope.

Touch Sensitive Monitor

Touch Sensitive Monitor is used to operate and navigate IMOS and responds to button

pushes through the Graphical User Interface (GUI). A keyboard and mouse may also

be fitted to operate and navigate IMOS.

2.3.2

VERSATILE FEEDER COMPONENTS

Versatile Feeder is a track mounted unit, with an end-station variant also available.

Up to 8 Versatile Feeder units may be fitted (7 if a Flex Folder unit is fitted). It feeds

enclosures such as short-form inserts (cards, reply envelopes, booklets), flyers etc,

onto the track for subsequent insertion.

Versatile Feeder is available with a single feed hopper only, holding up to 1000 80gsm

A4 inserts, with mark-reading variants available for OMR/Barcode/2D (top read only).

2.3.3

FLEX FOLDER COMPONENTS

Flex Folder is a folding unit and is only available as an end module. It can be fitted to

the Insert Head on its own, or in conjunction with Versatile Feeders. It folds documents

either separately or in groups, using an accumulator, and is fitted with various options

of feed pods (maximum of 2 feed pods).

NOTE:

Folding, including no-fold options may be set within IMOS, and used for

certain job types if required.

Flex folder uses a 3-plate folding mechanism, and 2D/BCR/ OMR reading is fitted as

standard, though a no-read option is also available on some variants.

Feed Pod

1 or 2 Feed pods may be fitted to the Flex Folder depending on the configuration, and

each pod consists of either of the following with mark-reading available as an option:

▪

2 x 500-Sheet Hopper

▪

1 x 1000-Sheet Hopper

Accumulator

Accumulator is optionally fitted to the Flex Folder and allows groups of forms to be

collated together before folding as a group, and is also fitted with a divert tray.

2.3.4

OUTPUT CONVEYOR COMPONENTS

Output Conveyor is an output device intended for use with a Sorter, Franker, Envelope

Printer, and or Inserter to provide a means of receiving filled envelopes prior to

hand removal for subsequent further handling, and may be fitted in two possible

orientations.

Speed of the Output Conveyor can be adjusted within IMOS for the relevant job, and

batches can be ‘jogged’ to provide a gap between each batch.

The Output Conveyor can be attached to the Inserter in two orientations:

▪

Angled 90º to the Inserter in the direction of the operator (default orientation)

▪

In-line with the Inserter

Adjustable Backrest

Adjustable Backrest allows envelopes to stack up against it once they reach the end of

the conveyor, and may be adjusted to suit the required amount of tilt.

Содержание DS-200iQ



































































































































Результаты поиска

Содержание DS-200iQ

Отзывы:

quadient DS-200iQ, Руководство пользователя, Страница: 13 / 130

Результаты поиска

Содержание DS-200iQ

Отзывы: