quadient DS-200iQ Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 231

quadient DS-200iQ Скачать руководство пользователя страница 17

Output Conveyor Components

Output Conveyor is an output device intended for use with a Sorter, Franker, Envelope

Printer, and or Inserter to provide a means of receiving filled envelopes prior to hand

removal for subsequent further handling, and may be fitted in two possible orientations.
Speed of the Output Conveyor can be adjusted within IMOS for the relevant job, and

batches can be ‘jogged’ to provide a gap between each batch.
The Output Conveyor can be attached to the Inserter in two orientations:

• Angled 90º to the Inserter in the direction of the operator (default orientation)
• In-line with the Inserter

Adjustable Backrest

Adjustable Backrest allows envelopes to stack up against it once they reach the end

of the conveyor, and may be adjusted to suit the required amount of tilt.

Output Sorter Components

Output Sorter is an output device and receives mail-pieces from an Inserter and directs

them to two or more output paths, e.g. an Output Conveyor. Operation of the Output

Sorter is programmed within IMOS and is job-specific.

Sorter Catch Tray

Sorter Catch Tray is optionally fitted at either exit of the Output Sorter, and receives

the envelopes in a stack to allow subsequent hand removal. It may be adjustable to

suit a variety of envelope sizes.

Turner Components

Turner is an output device that delivers mail-pieces to a franker and turns certain sized

envelopes through 90º in order to correctly orientate them for subsequent franking

operation: mainly applicable to C4 envelopes, and C5 with vertical windows.
Turner can be fitted to an Output Sorter, or on its own. Operation of the Turner is

programmed within IMOS and is job-specific.

2

Introduction

15

| Page 15 | May-29-2020 11:33 |

«
...
15
16
17
18
19
...
»

Содержание DS-200iQ








































































































































































































































Отзывы:

Нет отзывов