quadient AS-850 Скачать руководство пользователя страница 73

Страница: 73 / 86

SECTION 5

TROUBLESHOOTING

Printer

CONDITION

PROBLEM

SOLUTION

Touchscreen is Black and

Power Indicator Light is ON

Printer is in Sleep mode

Printer was Shutdown, but Main

Power was never turned off.

To wake printer, press any of the four

mechanical keys or tap the

Touchscreen.
Try to wake printer as described above.

If no response, turn OFF Main Power

Switch. Wait 20 seconds and power ON.

Touchscreen is Black and

Power Indicator Light is OFF

Main Power Switch is OFF. Printer

has no power.

Verify Power Cord is connected to

printer and a working (live) outlet.

Turn Main Power Switch ON.
If Power Indicator does not light up

when the Main Power Switch is turned

ON, then turn OFF Main Power Switch,

disconnect power cord and check

Fuse(s).
If problem persists contact technical

support.

Touchscreen is White

or showing product brand

splash screen

Printer is powering up.
Improper Shutdown may have

created a power-up issue.

IMPORTANT

: Use Shutdown feature

to safely power-down printer. Wait

for cursor on screen to disappear or

stop flashing before turning OFF

Main Power Switch.

Wait for 60 seconds.
If white screen is displayed for more

than 60 seconds, turn OFF Main Power

Switch, disconnect communications

(USB, Network) cable(s), wait 20

seconds and Power ON again.
If problem persists contact technical

support.

No communication

Improper settings or connection

Check interface settings and

connections.

Remove and reload Printer Driver.

Improper output

(garbage characters, missing

data, etc.)

Wrong Interface settings or poor

connection.
Software issue.
Possible Static discharge issue.

Check interface settings and

connections.
Check software or database on PC.
Pause printing. Select records to

Reprint. Resume printing.

One or more Cartridges stop

printing during print job.

Cartridge issue or empty.
Possible Static discharge issue.

Check/clean/replace ink cartridge.
Pause printing. Select records to

Reprint. Resume printing.

One or more Cartridges NOT

printing, starting with first

piece in print job.

Cartridge issue or empty.
Cartridge recognition issue may

have occurred during ‘wake”

process.

Check/clean/replace ink cartridge.
Pause Job. Open/Close Latch Lever. If

cartridge is recognized, Reprint records.

Resume printing.

If issue continues swap cartridge

positions. If problem follows cartridge,

replace cartridge.
Wake printer before sending jobs.

Содержание AS-850























































































Результаты поиска

Содержание AS-850

Отзывы:

Бренды по названию

Популярные бренды

quadient AS-850, Руководство пользователя

Результаты поиска

Содержание AS-850

Отзывы:

Бренды по названию

Популярные бренды