quadient AS-850, Руководство пользователя

Страница: 46 / 86

SECTION 3
OPERATING PRINTER
46
Adding New Form Size (Paper Size)
NOTE: The AS-450/650/850 Printer Drivers do NOT provide a feature for adding a “custom” page size.
Therefore you may need to add a New "Form size" using Windows "Print Server Properties".
See details below. Once added, this new Form size should be available as a “Page Size” choice in the Printer Driver.
Add a New Form Size (Paper Size)
1. Open Devices and Printers
2. Select (single click on) your printer driver.
3. Click on “ Print server properties ”, located
near top of view. The “Printer Server
Properties” window will open.
TIP: This feature will not appear unless you
have selected one of the printers in the
folder.
4. Select “ Create a new form ”
TIP: If you are not able to create a new form
(feature grayed out) or the new form size you
save does not appear in the driver, you may
not be logged into the computer with full
administrative rights.
5. Type a name for your new form, into the box
labeled “ Form name :”
6. Enter the Page size
“ Width ” (length in direction of feed) and
“ Height ”. Leave all margins at zero.
TIP: When creating a new form, it is best to set the page “Height” to a value that does not exceed the
printer's maximum print height.
Max Print Height: AS-450 = 2", AS-650 = 3", AS-850 = 4"
This will prevent the operator from positioning data outside the printers physical print height.
For example when feeding #10 envelopes, short edge first, in an AS-850, you would create the following
Page size. Width = 9.5" Height = 4"
7. Click on “ Save Form ”. Then Click on OK to close the window.
Verify that the new Form Size is available in your Printer Driver.
After adding a new "Form size", you should see the new form size listed in
the driver's "Paper Size:" pull-down list; as shown here.
NOTE : You may need to Close and Open driver/software, or reboot the
computer, after adding a new Form size, to make this new "Paper size"
available in driver properties.