background image

3

200 Series Conveyor Operator Manual    Issue 1 May 2011

1.2 Notes on the use of this handbook

This document contains all general information and explanatory text necessary in order to 

be able to carry out the operation of the machine.

When some action is expected from the operator, this will always be explicitly stated, and 

where relevant, accompanied by an illustration or graphic. 

Always read through each step, so that you will obtain all of the necessary information. Do 

not anticipate what you believe will follow in the handbook: It will prevent you from making 

mistakes!

Chronology and Reference

This handbook is structured chronologically, and therefore ordered sequentially for the 

operationally ready machine. It assumes that the machine has been installed in the 

correct environment by an Authorised Service Engineer and that the operator or his or her 

supervisor has had a degree of operator training.

When you are unfamiliar with the machine, it is best to read through the handbook from 

beginning to end. You will be guided step by step, and in this way you can easily and quickly 

have the machine in operation.

If you are already familiar with the machine, it will make things easy if you use this 

handbook as a reference work.

2 Safety notes

For your own safety and the operating safety of the machine, read the following notes 

carefully before starting your machine. Always be aware of all warnings and notes that 

are mounted or noted on the machine itself. Save this handbook carefully, so that the 

information it contains may be available at all times.

The machine is of advanced construction and reliable in operation. Nevertheless, the device 

does present hazards when operated by untrained personnel. The same applies to use that 

is inappropriate and not in keeping with its intended purpose.

In not adhering to this handbook, there is the danger of

 

• 

an electrical shock,

 

• 

injuries from the intake at the rotating rollers,

 

• 

damage to the machine.

Содержание 200 Series

















Отзывы: