QUAD ACCESS MFX-3590, Руководство по сканеру и факсу

Страница: 73 / 218

3-10 Basic faxing
„
Dialing options
You can insert dialing options when entering fax numbers or when registering address
book destinations.
Name Option
*1
Functions and Applications
Hyphen — Makes the entered fax number easier to see.
(Example) 111-1111-1111
Tone /T This is used to switch from pulse-dialing to tone-dialing. This option
may not be available in some countries and regions.
Pause /P This is used to open a space between dials. To increase the pause
time, enter multiple pause options.
The time for each pause can also be changed in the settings. For
details, see
“List of other default settings” (page 7-40) .
Prefix /N This is used to enter a prefix number. A prefix number can only be
used when specifying the destination using the numeric keys.
To use a prefix number, it is necessary to register it in advance.
For details, see
“List of other default settings” (page 7-40) .
*1 To enter dialing options in PC fax, enter the options indicated in the option column.
1
Load the document.
2
Press [Fax] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until “Fax Ready” screen is
displayed.
3
Press [Num. keys].
4
Enter the desired dialing option, and press [Enter].
To select [-] or [Tone], press [Dialing Opt.] and select the desired dialing symbol.
5
Specify the destinations, and press <Start>.
• For details on specifying the destinations, see “Specifying destinations” (page 5-2) .
• If you loaded the document in the automatic document feeder, this concludes the procedure.
• If you loaded the document on the document glass, the message “Set next document.” is
displayed when the loaded documents have been scanned. Load the next document, and
press [Next Doc]. Press [Tx Start] to start transmission.