160.459UK User Manual
TIMER CONTROLLER
The timer controller can be used to control the HZ-3 remotely.
Please note Fan Speed (FS) and Haze Output (HO) must be set to zero for the remote timer
controller to operate.
1.
Timer on/off button
2.
Continuous output
3.
Manual override button
4.
Timer LED indicator (Illuminated Yellow when timer active)
5.
Manual ready indicator (Illuminates Green when ready)
6.
Power indicator (Illuminates red when power is on)
7.
Adjust the amount of Haze released (between 0
–
100%)
NOTE
:
The below controls are only used when in timer mode
8.
Adjust the interval gap between each release of Haze (between 0
–
30 Min
approximately)
9.
Adjust the duration the Haze / Haze is released at each interval (between 0
–
15
seconds approximately)
F
or best results select “continuous” and adjust output to achieve desired effect, note it
can take around 30 seconds for the machine to produce the correct output.
