Installation Manual
3. Router Installation
22
www.qtech.ru
panel of the device with a screwdriver, and install on both sides of the rear
panel of the device before installing device on the cabinet.
Step 2:
Use the M6 panel screws to fix the floating nuts on the chassis mounting ears and
cabinet post square hole bar, so as to prevent the router from sliding front and
back.
Figure 3-5 Install the router to the cabinet
The hanging ear does not bear the weight. Do not bear the router only using a
hanging ear without installing the slide (tray).
Check the Installation
After the router is installed to the cabinet, check the installation based on the following items
and ensure all the items are normal.
Check and ensure that the router is installed correctly.
Check and ensure that the router hanging ear and cabinet are secure and well.
Check and ensure that enough space is reserved around the router for heat dissipation.
Ground the Router