Configuration manual
7. System Management
80
www.qtech.ru
Enter
the
global
configuration mode.
configure terminal
-
Configure the system
exception
processing
mode
exception { period-detect
enable | reboot { enable |
disable | level { alert | critical
| emergency | error | warn }
} }| detect-health { ignore |
reload}}
Mandatory.
By default, periodical
exception detection is
enabled,
ignore the
error report of the
health detection,
and
the exception level set
for device restart is
critical.
After an exception level is configured for device restart, if an exception at
the level or a higher level occurs, the device restarts.
From high to low, exception levels include emergency, alert, critical, error,
and warn.
7.2.5
Configure to Restart a Device
Configuration Condition
None
Restart a Device
When a device fault occurs, you can choose to restart the device according to the actual
situation so as to eliminate the fault. The device restart modes include cold restart and hot
restart. In a cold restart, the user can directly power off the device and power on the device
again. In a hot restart, the user restarts the device by using a restart command. During the hot
restart process, the device is not powered off.
Table 7-6 Restarting a device
Step
Command
Description
Use a command to
restart the device.
reload
Mandatory
