Developed specifically for the unique requirements of
professional motion picture playback, QSC extends its
commitment to the cinema market with the introduction
of the SR-110B Cinema Surround Loudspeaker. As a
member of QSC’s DCS Digital Cinema Speaker Series,
the SR-110B offers high-power handling, excellent
sensitivity, and extended bass response in a very
compact enclosure.
The SR-110B Cinema Surround Loudspeaker features
a high-power, long-throw 10
"
low-frequency transducer
coupled with a 1
"
titanium diaphragm compression
driver. The system’s plywood enclosure features a
15º down angle baffle and Array Optimized Tuning
(AOT) for optimum frequency response. The 200 watt
continuous power rating and sophisticated crossover
provides absolute reliability.
The compact black enclosure with black grille blends
into any theatre decor. A new QuickMount bracket
design allows for fast, easy and secure installation. The
loudspeaker half of the bracket comes pre-installed
on each SR-110B. The QuickMount wall bracket
is purchased separately to allow shipment to the
job site ahead of the loudspeakers. A traditional
U-bracket is also available in lieu of the QuickMount
bracket system.
SR-110B
Cinema Surround Loudspeaker
Specifications
Frequency Range
1
-6 dB half space
50 Hz – 20 kHz
-10 dB half space
42 Hz – 20 kHz
Nominal Coverage
90° horizontal x 85° vertical (averaged from 1 kHz to 10 kHz, -6 dB)
Directivity Index
7.5 dB
Q
5.6
Maximum Output
2
Calculated Peak at Rated Power
123 dB
Calculated Continuous
117 dB
Impedance
8
Ω
nominal
Maximum Input Power
3
100 hours of 6 db crest factor
150 W RMS
IEC 268 noise spectrum
2 hours of 6 db crest factor
200 W RMS
pink noise, 50 Hz – 20 kHz,
AES method
Recommended Amplifier Power
400 W RMS maximum into 8
Ω
Sensitivity 1 watt /1 meter, half space 94 dB
Crossover Frequency
2.6 kHz
Recommended Processing
Subsonic filter at 50 Hz as provided by QSC DCA amplifiers
Connectors
Barrier strip screw terminals accept up to #10 AWG stranded wire
Transducers
10" long throw low-frequency transducer
1" titanium diaphragm compression driver on a CD horn
Enclosure
Plywood, baffle angle is 15° downward
Dimensions (HWD)
23" x 12" x 12.25" (584 mm x 304 mm x 311 mm)
Weight – Net
31 lb (14 kg)
1) All frequency ranges specified refer to measured free field response (half space, 2
π
).
2) Calculated SPL at 1m, (half space, 2
π
), speaker operating at rated RMS power with pink noise within specified frequency range.
3) Maximum input power tested in accordance with IEC 268-5 recommendations, 50 Hz – 20 kHz band limiting, 6 dB signal crest factor.
Features
• Parallel outputs for feeding additional units
• 95˚ horizontal dispersion
• QuickMount bracket for fast, easy and secure installation
• High-power handling capability and rugged plywood enclosure
optimized for digital soundtrack reproduction
• THX
™
approved for professional cinema applications
